Repair Parts
Get back up and running fast
Get back up and running fast
Maintenance and repair parts, at the ready.
Maintenance and repair parts, at the ready.
Whether you’re performing general maintenance and seal replacement or run into a problem in-field, sometimes you’ll need parts. OILCO aims to ship repair kits and replacement seals within two weeks, but can often turn around support faster. Meaning you’re back up and running in as little time as possible.
Whether you’re performing general maintenance and seal replacement or run into a problem in-field, sometimes you’ll need parts. OILCO aims to ship repair kits and replacement seals within two weeks, but can often turn around support faster. Meaning you’re back up and running in as little time as possible.
Repair Parts
Get back up and running fast
Maintenance and repair parts, at the ready.
Whether you’re performing general maintenance and seal replacement or run into a problem in-field, sometimes you’ll need parts. OILCO aims to ship repair kits and replacement seals within two weeks, but can often turn around support faster. Meaning you’re back up and running in as little time as possible.
O-ring repair kit
All OILCO o-ring series swivel joints have available replacement seals and repair kits for units in 2” through 4” sizes.
V-ring repair kit
All OILCO v-ring series swivel joints have available replacement seals and complete repair kits for units in 2” through 4” sizes. Available in standard and split-flange versions.
Model 883-ANF-X
This is the long radius version of the standard 4” aluminum cast unit. It has a center elbow mounted boss for handles and TTMA flanged ends.
Model 40-A
This drop pipe is the most commonly used outboard option for top loaders. It is available in 2”, 3”, and 4” sizes. An overall length standard of 48”, it has a male NPT threaded end with 45 degree cutoff.
Model 40-AM
This drop pipe is used both as a drop leg or secondary tube. It is available in 2”, 3” and 4” sizes. An overall length standard of 48”, it has male threaded end connections.
Model 640-W
This adjustment wrench is used for all OILCO-designed torsion spring counterbalance assemblies.
Model 66-ANF
Model 66-ANFG
This aluminum spacer spool with a sheer groove was designed for the outboard end of a load arm. The overall length is 6” and it has TTMA flanged connections.
Type D Handle
This handle is a shovel-style version replacement for the straight pipe connections that are offered as standard equipment on loading assemblies.
Model 18
This elbow handle assembly is designed for ease of use where shot downspouts are required. It’s available in aluminum in 2”, 3”, and 4” female NPT.
Model 19
This vacuum breaker is 3/8” NPT brass with a Viton disc or chrome-plated brass with Kalrez disc. The Model 19-A is an aluminum version with a Viton disc available with ½” NPT.
Model 25
This circular flow deflector can be bored to fit or threated to either 2”, 3”, or 4” drop pipe sizes.
Model 26
This aluminum strainer-type end cap can be bored to fit or threaded to either 2”, 3”, or 4” drop pipe sizes.
Model 33
This aluminum tee deflector can be bored to fit or threaded to either 2”, 3”, or 4” drop pipe sizes.
Model 88T
This vertical support pillow block and cap is available for loading assemblies that utilize 3” and 4” boom structures.
Model 89T
This horizontal support pillow block and cap is available for loading assemblies that utilize 3″ and 4″ boom structures.
Model 773-HJ
This is a flexible stainless steel hinge hose with carbon steel TTMA flanged connections. It is designed and tested for a 200,000-motion duty cycle. It is available in 4” size.
Model CWT-S1
This horizontal support pillow block and cap is available for loading assemblies that utilize 3” and 4” boom structures.
Model 5300-B Snap-On Type, API Dry Break Coupler
This 4” TTMA, five cam design for simple alignment and peak performance. It is RP-1004:2003 compliant. The removable seal offers Buna-N, Viton-B, or Viton GFLT options. It has an easy ball-type main handle for operation. The flow rate offers up to 600 GPM and a 150 psi maximum working pressure. It is hard-coat anodized aluminum (AL 356 T6).
Model 258-GS Outboard Horizontal Leveling Assembly
This optional outboard leveling assembly is designed to assist with bottom loading. In the out-of-service resting position, the coupler is maintained in a relatively secure horizontal position, effectively preventing any portion of the loading assembly from coming in contact with the service island.
Model A Valve Control Lever
This remote-control assembly may be supplied on any standard top-loading assembly to provide valve control at the load point by operator. The assembly can be adapted to 2″, 3″, and 4″ pipe sizes.
Model 641 Torsion Spring Counterbalance
This single spring balance design is suited for smaller diameter or shorter reach loading assemblies. Unit automatically stays down when moved below horizontal position. Can easily be raised to horizontal position, from which it will return to the desired service position. Built as a dedicated left- or right-hand profile. Utilize up-feed or down-feed, depending on riser position.
In/lbs. of torque output at 100° deflection
· 641-DC = 3,000
· 641-PC = 5,000
Model 640 Torsion Spring Counterbalance
In/lbs. of torque output at 100° deflection
· 640-DC offers 6,000
· 640-PC offers 10,000
Model 645 Torsion Spring Counterbalance
This single spring balance design is suited for smaller diameter or shorter reach loading assemblies. Unit automatically stays down when moved below horizontal position. Can easily be raised to horizontal position, from which it will return to the desired service position. Built as a dedicated left- or right-hand profile. Utilize up-feed or down-feed, depending on riser position.
In/lbs. of torque output at 100° deflection
· 641-DC = 3,000
· 641-PC = 5,000
